Flat screen TV mounted on the wall is a pleasant sight. With a better picture and sound quality flat screen LCD or plasma TV, and adds to the aesthetic ambience of each room. However, power cables and wires hanging down, and lying around the prey image of perfection that Flat screen TV offers.
What are the different options?
There are several ways you can hide kabeli.Jednostavna energy option is to hide the wires behind furniture such as cabinets and wall hangings, a more permanent option is to hide the wires in the walls behind the flat screen TV wall montirati.Druga option to pre-existing outlet, especially if the walls are solid. In the case of dry or wooden partition walls, a little drilling and cutting will allow you to hide the cables effectively while installing your flat screen TV wall mount.
Can I skip the drilling and cutting?
uses an increasingly popular option today is to hide the wires in decorative moldings that look good, mixing easily with the wall. It involves less drilling and can be done quickly, within an hour or tako.Ukrasne moldings or raceways as they are also known can be painted to match the wall color.
What are the standard guidelines to be followed?
If you decide to cover the wires in the wall there are several things you should keep in mind. First of all, it would be better not to run wires through the outer wall, which includes difficulty in drilling for additional reinforcement and insulation. You will also need to select the heat and fire-proof HDMI cables according to local standards.
also do not run power cables through the walls, which is a violation of safety codes, only on TV AV cables can be passed through. You can also cut a hole in the wall and pass the TV cable to be connected to an outlet behind a wall at the other end.
How to run TV cables through the wall?
In most cases, however, the cables are connected to the DVD player, cable box, etc. is about 2-3 feet below Flat screen TV. The devices are generally placed in a cabinet with outlet located behind the cabinet panels. If no existing outlets may need to get one installed.
You will need a knife, wall sockets, cables and of course the nut and bolt to turn the screw. Use the marker outline square on the top behind the TV wall mounts and one immediately below it, behind the cable box and DVD player cabinet. Then cut these areas using a knife or use a drill and a small cable TV down.
to link them to both ends of the socket into which you are attached to the wall and you're good to go. In the last part to be connected all the plugs into the socket, turn the power on, and then sit back and relax watching your favorite show or movie.
0 comments:
Posting Komentar